Universal Fast Smart Battery Charger
than the stock charger included on Redcat's electric vehicles. Charge
time 1-2 hours average.
Rated output voltage: 17.8V ± 0.2V
Features and Benefits
Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack)
Fast charger with current switch to select either, 0.9A and 1.8A. Delivers full charge within 1 - 2 hours.
Charging Current 0.9A for battery packs with capacity from 1100mAh -2200mAh. For 2000 mAh pack, charging time is 1 hour.
Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
Smart Charger with automatic voltage detection.
Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
Red LED will be on during charging.
Automatically charging ending with negative delta V.
Worldwide usage with 120-240V AC
With Temperature sensor
Safety protection fuse for over current, short circuit & reverse polarity protection.
1 standard Tamiya Female connector and Fuse house with the smart battery charger.
1 connector adaptor from standard Male Tamiya to Mini Female.
1 set of clip adaptor with Male Tamiya connector on one end.
2 additional fuses
Smart Charger Specification
FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY
Output: 6-12V 0.9or1.8A
Connect battery pack to output connector and plug AC power source.
Make sure battery polarity is connected correctly (Red wire is positive)
Charger will detect battery voltage automatically, Red LED will be on during charging
When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
Battery will be charged at 0.9A or 1.8A constant current,
Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.
The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun.
Don't charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh.
Battery pack must be made by high drain current cell.
Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage.
The charger is designed for indoor use only. Don't leave the charger unattended during charging.
The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
Don't cover the charger when charging, ambient temperature shall not be more than 40oC
Don't touch the plug.
Don't leave the batteries and chargers on wood surface or carpet.
Cut off the power supply before connect or disconnect the charger with batteries.
Don't try to disassemble the charger, High voltage inside, danger!